As full-arch dentistry continues to grow, so do the demands on today's dental laboratories. That's why Knight Dental recently launched SimplyARCH Studio, a dedicated production environment built exclusively for full-arch restorations. To support this specialized workflow, Knight invested in an XTCERA milling system and carefully evaluated multiple CAM software solutions before choosing hyperDENT. The decision came down to exceptional milling quality, minimal hand finishing, and impressive production efficiency. But what truly set hyperDENT apart was the implementation process. From the very beginning, the team provided more than software training—they shared the knowledge and experience needed to build an optimized workflow for complex full-arch cases. With proven expertise in advanced milling strategies and laboratory production, hyperDENT helped ensure SimplyARCH Studio was designed for long-term success from day one.Matt Everatt joins Elvis and Barb for a fascinating conversation that takes a deep dive into his journey through the dental laboratory industry and the story behind his book, The Invisible Profession. From discovering dental technology at 16 and specializing in maxillofacial prosthetics and orthodontics to working in hospitals, developing early sleep-apnea appliances, and nearly leaving the profession altogether, Matt's career has taken some seriously interesting turns. Eventually, he helped co-found S4S, building a successful business around sleep-apnea appliances, occlusal splints, orthodontics, and more before eventually stepping away from ownership.

Matt Everatt joins Elvis and Barb for a fascinating conversation that takes a deep dive into his journey through the dental laboratory industry and the story behind his book, The Invisible Profession. From discovering dental technology at 16 and specializing in maxillofacial prosthetics and orthodontics to working in hospitals, developing early sleep-apnea appliances, and nearly leaving the profession altogether, Matt's career has taken some seriously interesting turns. Eventually, he helped co-found S4S, building a successful business around sleep-apnea appliances, occlusal splints, orthodontics, and more before eventually stepping away from ownership.

But this conversation goes far beyond Matt's career. His book, The Invisible Profession, explores how the dental laboratory industry arrived at a place where technicians and laboratories are often undervalued, pushed into price competition, and expected to simply keep their heads down and produce. Matt shares his thoughts on the "million little things" that shaped the industry, the danger of becoming a "busy fool," and why laboratories need to stop competing solely on price and start becoming known for the value, expertise, and partnership they bring to the dental team. Elvis, Barb, and Matt also talk about the changing landscape of digital dentistry, AI, 3D printing, speed, service, and why the labs that embrace change and remain agile will be the ones positioned for the future. It's an honest, thought-provoking, and ultimately optimistic conversation about where the dental laboratory profession has been, where it is today, and where it can go next.

Special Guest: Matt Everatt.

At exocad Insights in beautiful Mallorca, we finally caught up with Felix from Imagine USA—and the timing couldn’t have been better. As an exocad dealer on the front lines of digital dentistry, Felix shared his excitement about the strong turnout, the familiar faces, and most importantly, the innovation coming from exocad. What stood out most? The new exocad Hub and its cloud-based capabilities, along with powerful AI-driven tools inside DentalDB designed for efficient batch processing. For Felix and the Imagine team, it’s not just about seeing what’s new—it’s about putting it to the test. By running new features through their own production facility first, they ensure real-world performance before bringing solutions to their customers.

Fresh off the beaches and lectures of the beautiful island of Mallorca at the exocad Insights 2026 , Elvis and Barb sat down with three incredible women proving that digital dentistry is global, creative, and fueled by passion. First up is Andreea Bordea, a ceramist and lab owner originally from Romania who found her way into dental technology after narrowly missing acceptance into dental school. From analog waxing and staining zirconia with a single A2 shade to opening her own lab in Spain and building a digital workflow around exocad, Andreea shares the journey of learning everything the hard way. She talks about teaching herself digital dentistry, building a team, and how social media unexpectedly became her outlet while working alone in her lab. The conversation also dives into Ivoclar materials, zirconia, and the excitement around new products launched at Insights.

Then the microphones turn to Denisse Ramos from for one of the most energetic conversations of the event. Denisse talks about her journey from Enterprise Rent-A-Car and Coca-Cola into the dental industry, eventually becoming a major force in digital workflows, 3D printing, and equipment sales. From Dentsply to Desktop Health and now leading sales at New Stetic USA, Denisse shares stories about mentorship, industry evolution, women in dentistry, and why labs need to charge for their expertise. We all talk about the rise of digital dentistry, treatment planning frustrations, social media, the future of dentures, and the importance of giving back through organizations like Ladies of the Mill and the NADL.

Finally, Elvis met Daniela Torres, better known online as “Danny Designer,” a digital designer from Chile whose Instagram portfolio turned into a thriving business. Daniela explains how she taught herself exocad through YouTube before traveling to Madrid for advanced training, eventually working at the MOD Institute in South Carolina before returning to Chile to build her own remote design business. From designing full arch restorations and dentures to handling dozens of cases a day entirely through email and WhatsApp, Daniela proves how powerful digital dentistry and social media have become for technicians worldwide. The conversation wraps with excitement around exocad’s newest updates, the exocad Hub, and what it means to be recognized as an exocad Hero.

Special Guests: Andreea Bordea, Daniela Torres, and Denisse Lasso Ramos.

At exocad Insights in beautiful Mallorca, we finally caught up with Felix from Imagine USA—and the timing couldn’t have been better. As an exocad dealer on the front lines of digital dentistry, Felix shared his excitement about the strong turnout, the familiar faces, and most importantly, the innovation coming from exocad. What stood out most? The new exocad Hub and its cloud-based capabilities, along with powerful AI-driven tools inside DentalDB designed for efficient batch processing. For Felix and the Imagine team, it’s not just about seeing what’s new—it’s about putting it to the test. By running new features through their own production facility first, they ensure real-world performance before bringing solutions to their customers. Beyond the technology, Felix emphasized the value of being there in person—connecting face-to-face with partners, having meaningful conversations, and stepping back to see where the industry is headed. And of course, doing it all in Mallorca doesn’t hurt either.

This week Elvis and Barb are back at exocad Insights 2026 where the microphones captured two very different conversations that somehow landed on the exact same thing: passion still matters. First up, we sat down with longtime dental technicians and Oral Design International Foundation members Pinhas Adar and Javier Perez to talk about the legacy of the legendary Willi Geller and how one man helped elevate dental technicians from the shadows to respected members of the restorative team. From stories of learning under masters in Switzerland to building a worldwide family of 127 members across 34 countries, the conversation dives deep into friendship, mentorship, craftsmanship, and why face-to-face connection still matters in a digital world. They also share details about upcoming memorial and symposium events dedicated to carrying on Willi’s philosophy of passion, respect, and sharing knowledge without ego.

Then the crew caught up with returning guest Dora Rodrigues, who has gone from conversion queen to certified exocad trainer, full-arch educator, and lab owner running an increasingly digital workflow. Dora talks about finally bringing milling in-house, the terrifying learning curve that came with it, and how mastering workflows like split bars and partial CAD has completely changed the way she designs full-arch restorations. Between traveling internationally to lecture, teaching labs how to streamline their workflows, and still designing cases herself, Dora proves that digital dentistry still takes serious technical skill, problem-solving, and obsession with detail. It’s an episode full of passion, legacy, technology, and the reminder that no matter how digital dentistry gets… the people behind it still make all the difference.

Today’s dental labs are under more pressure than ever — tighter turnaround times, staffing challenges, and nonstop production demands. That’s why efficiency and reliability matter more than ever before.

More laboratories continue turning to Roland DGA and the proven performance of the DGSHAPE DWX Series milling solutions to keep production moving smoothly. Reliable workflows help reduce downtime, minimize remakes, and allow technicians to focus on quality work instead of troubleshooting equipment.

For labs exploring digital dentures, the Elevate Denture Solution offers a streamlined workflow with validated CAM strategies and Ivotion compatibility through hyperDENT software — helping labs adopt digital production without unnecessary complexity.

Because labs don’t need more stress. They need dependable systems that simply work.

Special Guests: Dora Rodrigues, Javier Perez Lopez, and Pinhas Adar MDT, CDT.

At exocad Insights in beautiful Mallorca, we finally caught up with Felix from Imagine USA—and the timing couldn’t have been better. As an exocad dealer on the front lines of digital dentistry, Felix shared his excitement about the strong turnout, the familiar faces, and most importantly, the innovation coming from exocad. What stood out most? The new exocad Hub and its cloud-based capabilities, along with powerful AI-driven tools inside DentalDB designed for efficient batch processing. For Felix and the Imagine team, it’s not just about seeing what’s new—it’s about putting it to the test. By running new features through their own production facility first, they ensure real-world performance before bringing solutions to their customers. Beyond the technology, Felix emphasized the value of being there in person—connecting face-to-face with partners, having meaningful conversations, and stepping back to see where the industry is headed. And of course, doing it all in Mallorca doesn’t hurt either.

Mallorca, Spain. exocad Insights 2026 Three completely different conversations somehow all landed on the same theme: digital dentistry keeps getting smaller, smarter, and way more connected. First up, the crew catches back up with digital designer and educator Marjorie de Andrade, who went from Brazil to New Zealand chasing opportunity, only to end up building a global career through remote design, social media, and education. Marjorie talks about creating the Mastering exocad course, freelancing for dentists around the world, and why finding purpose through teaching became more important than simply designing crowns. She also shares thoughts on the newly announced exocad Hub, remote collaboration, and how digital dentistry is making communication between dentists and technicians easier than ever.

Then the microphones turn to Dr. Dwight Pate for one of the most workflow-heavy conversations the podcast has ever had. From hand waxing cases the old-school Dawson and Pankey way to designing provisionals and controlling full-mouth rehabs completely through exocad, Dr. Pate breaks down how he combines analog principles with digital workflows. The discussion dives deep into occlusion, provisionals, articulators, guided workflows, AI design, and why he believes digital dentistry still has to prove itself back in the analog world before it ever reaches the patient’s mouth.

Finally, the crew reconnects with Dr. Eimear O'Connell to talk about why clinicians need to attend events like Insights just as much as technicians. Eimear shares how digital workflows are improving communication between doctors, labs, and patients while making implant planning, dentures, and aesthetic dentistry more predictable than ever. From digital dentures that fit with almost zero adjustment to helping patients emotionally reconnect with their smiles, the conversation reminds everyone that behind every scanner, workflow, and software update is still a real person whose life changes because of dentistry.

Special Guests: Dr. Dwight Pate, Dr. Eimear O’Connell, and Marjorie de Andrade .

This week we wrap up the episodes that we got while in the Ivoclar Ballroom at LMT Lab Day Chicago 2025. First up is Federico Manes from MODJAW. Federico talks about discovering the world of dental, using his digital background to help a lab get digital, and how they have worked out a system to bring accurate jaw motions to all design software.

Then we meet Mellissa Everett. Mellissa loves being a dental technician. She loves it so much, she is usually working at two labs at the same time. She talks about finding out about dental, her desire to become a ceramist, and how her crazy work schedule has actually helped her become a better technician.

We then wrap up the episode with a different conversation. Two past podcast guests come on to give us a follow up. Sandra Puurits is from Finland. Jay Work is from Pennsylvania. Last year they meet at Lab Day 2024 for the first time. Now they are engaged and enjoying being them..... together.

Sandra's episode: https://www.voicesfromthebench.com/214
Jay's episode: https://www.voicesfromthebench.com/271

Don't miss this incredible webinar with Tanya Little, a dentist from beautiful Vancouver, Canada. We would like to invite you to a special webinar that she's hosting with Ivoclar and LMT on Wednesday, May 7th, titled "Reflections from a Denturist: 20 Years of Crafting Dentures!". In this program, she will review the incredible history of removables with Ivoclar and focus on the new and exciting evolution based print resin and of course, the PM7. Her goal is to provide you with several key takeaways that will allow you to work smarter and not harder. You can join on May 7th by registering at https://lmtmag.com/webinars/reflections-from-a-denturist-20-years-of-crafting-dentures

Are you a dental lab in need of more talent to improve your bottom line and keep production on schedule? Are you a dental tech with great skills but feel you're being limited at your current lab? Well, the answer is here and this is precisely why WIN WIN GO was created. The dental lab and dental tech community needed a place where labs and technicians can meet, talk about their needs and connect in ways that foster a win win outcome. As a tech. If you're ready to make a change, thinking about moving in the next year or just curious what's out there, sign up today. It's totally free. As a lab, you might be feeling the frustration of paying the big employment site so much and getting so few tech candidates. We understand they don't much care about our industry. WINWINGO.com is simply the best place for lab techs and lab owners to actively engage in creating their ideal future. WINWINGO.com, how dental techs find paradise.

Special Guests: Federico Manes, Jay R. Work III, Mellissa Everett, and Sandra Puurits.

DONATE TODAY: https://fortworth.californiatriathlon.org/Race/Register/?raceId=99407

We are starting off the collection of conversations from the Florida Dental Laboratory Association Symposium in Orlando, Florida. Last June the AMAZING people at Jensen Dental gave us space in their fantastic booth to record some of the attendees.

First up is Enja Dorchuluun from Sakr Dental Studios. Enja talks about her history at Sakr, how they are using automation in the lab, and getting ready to move the lab from 5 buildings to one.

Since we were in the Jensen Dental booth, we had to talk to the technician known for his amazing work with MIYO, Bart Cothran. Bart chats with us about his journey into dental, owning his own lab, teaching MIYO to others, and some great tips for this amazing liquid ceramics.

Then we wrap up the episode with a technician full of so much passion to giving back, he's going through the board of the FDLA for the second time. Fernando DeLeon was in dental school in Guatemala when he decided being a dental technician might be a better fit. Fernando talks about his passion for changing a life, his passion for giving back, and his passion on doing the best he can for his patients.

Introducing Ivotion Digital Dentures from Ivoclar – Experience unparalleled precision and efficiency with Ivoclar‘s state-of-the-art digital denture workflow.

Ivotion is available in their patent pending monolithic disc that combines denture base and tooth materials in one seamless puck. Or if you lab needs more flexibility, Ivotion is also available as stand-alone discs - Ivotion Base, Dent and Dent Multi all in 98mm width to fit your favorite milling machine.

With Ivotion you can streamline your lab’s processes, reduce production time, and enhance patient satisfaction. Elevate your lab's capabilities with Ivotion Digital Dentures – where innovation meets perfection. Discover the future of dentures today with Ivoclar." Thanks for your continued support of the podcast Ivoclar.

Join the GOLDEN BENCH CLUB! All you have to do is leave us a 5-star review and comment on the Apple Podcast app (or any other app and email us a screen shot) and we will read your review on the podcast and welcome you to the Golden Bench Club. This super elite club is only for the best of the best.

Special Guests: Bart Cothran, Enja Dorjchuluun, and Fernando DeLeon.

As we continue the amazing conversations we got while at exocad Insights 2024 in Mallorca, Spain, we want to thank again the good people at exocad that made all this possible. This episode brings us three fantastic conversations with 3 fantastic people.

First up is Dr. Marcus White from England who is one of the UK's foremost opinion leaders in digital dentistry and intra oral scanning. Dr. White talks about his on-site lab, utilizing remote designers and milling centers, and his view of the full arch workflow.

Next is UK lab owner, Ashley Bryne. Ashley is the son of a lab owner that told him not to get into the business. It's a great thing he didn't listen to him, because now Ashley owns Brynes Dental Lab, one of the biggest labs into digital and implants in England. Ashley talks about his journey, why his labs uses both exocad and 3shape, bringing technicians to Insights, and being a part of the Conus Group of laboratories.

Then we wrap up the episode with Seth Potter. Since the age of 12, Seth knew he wanted to be a dental technician. After school and working in a lab, Seth soon found himself needing a new direction. So, he got a laptop and exocad and started looking for work. Now he's not only a freelance designer but also a Independent Certified exocad Trainer.

Introducing Ivotion Digital Dentures from Ivoclar – Experience unparalleled precision and efficiency with Ivoclar‘s state-of-the-art digital denture workflow.

Ivotion is available in their patent pending monolithic disc that combines denture base and tooth materials in one seamless puck. Or if you lab needs more flexibility, Ivotion is also available as stand-alone discs - Ivotion Base, Dent and Dent Multi all in 98mm width to fit your favorite milling machine.

With Ivotion you can streamline your lab’s processes, reduce production time, and enhance patient satisfaction. Elevate your lab's capabilities with Ivotion Digital Dentures – where innovation meets perfection. Discover the future of dentures today with Ivoclar." Thanks for your continued support of the podcast Ivoclar.

Special Guests: Ashley Byrne, Dr. Marcos White, and Seth Potter.

Did you know that not all Zirconia is the same?

ZirCAD Prime Zirconia from Ivoclar is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength.

ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723!

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Join Elvis & Barb as Voices From the Bench goes international! On May 9th and 10th, the podcast will be recording at https://exocad.com/insights2024 on the beautiful Spanish island of Mallorca.

This is a fantastic educational event for all of you in the lab industry – and your clinical colleagues!

The international speaker line-up is top-notch.

There will be: keynote presentations from master dental technicians, digital experts, implant surgeons, lab owners, and more!

Exocad’s software experts will run hands-on sessions so you can get to know the latest releases…including DentalCAD 3.2 Elefsina…which was released recently.

Techs…. Do you have a problem with a design? Just bring your stl file and let the Application Specialists take a look at it.

Check out exocad.com/insights2024 to see the AMAZING line up of speakers and to register. Use promo code VFTB15 to save 15% off registration to what will be one of the greatest events of the year.

See you there!

Special Guest: Aleksandra Polczynski.

Be sure to get a SUPER LIMITED edition ZIPPERED HOODIE (or shirt) before JANURARY 6th.
Get your "Dental Technicians: Making Dentist Look Good Since the 1700s" HERE!

You have heard Elvis talk about the Mastering exocad Course he took from the Institute of Digital Dentistry. Well we had the amazing opportunity to talk to the instructor of the series, Marjorie Andrade. Marjorie has a fascinating and fast-tracked journey into the world of teeth. While still in Brazil, she went to technician school and found herself in a lab learning digital in just a few days. Eventually she was so good and fast, so after work she would freelance for people all over the world. It wasn't long before she connected with Dr. Ahmad and was recording (in two languages) the exocad course and then moving all the way to New Zealand to work at the lab of her dreams. All this in less than 5 years!

Are you in the market for top-notch digital equipment, such as mills, scanners, or furnaces? Well, the time to act is NOW! Ivoclar, has introduced unbeatable rates exclusively for customers in North America.

Ivoclar has made it easier for you to invest in cutting-edge digital equipment with lower-than-prime interest rates. Whether you're looking to upgrade your milling capabilities, enhance your scanning technology, or optimize your furnace performance, Ivoclar Digital has you covered.

To take advantage of this offer, the dedicated Digital Specialists at Ivoclar are ready to assist you. For details on how to get in touch, visit Voicesfromthebench.com and the Ivoclar tab to find all the information you need to get started.

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Candulor a dental supply company from Switzerland has solutions no matter if you are analog or digital

Check out their PhysioSet TCR tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from.

The Swiss School of Prosthetics in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply

Candulor, High End Only

Have you ever wanted to learn exocad? Do you find learning new design software overwhelming or just too costly because you have to go to a weekend course. Even if you have never used design any software before, we have the perfect solution for you to begin your exocad journey. Head over to the Institute of Digital Dentistry and select the “Mastering Exocad Course”.

Broken down to three segments, the amazing Marjorie will take you through Fundamentals, Intermediate, and Advanced courses leaving you with the confidence to tackle most cases coming into your lab. I personally am going through all 70 lessons and find it one of the most thorough courses you can take at your own pace.

And for being a listener of the podcast, if you enter code VOICES when checking out they will take an additional 10% off any course they offer…. And they offer a ton of content for labs and clinics.

Special Guest: Marjorie de Andrade .

Join Kristina Vaitelyte, Elvis Dahl, Barbara Warner, and so many more at exocad Insights May 9 - 10, 2024 in Mallorca, Spain!

Did you know that Ivoclar has Digital Equipment Sales Specialists?

These experienced professionals are here to help make your transition to digital, a smooth one. They help provide customized solutions, analyze your ROI, provide hands on assistance and localized support. All of this, catered to your needs. Contact a Digital Equipment Sales Specialist today by emailing Digitalspecialists@ivoclar.com. Tell them you heard it on the podcast!

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Special Guest: Kristina Vaitelyte.

Join Elvis and Barb in Mallorca, Spain in May 2024 for exocad Insights. Make plans today and more details to follow!

We love stories of success in the dental lab industry. One such story is the career of Todd Reid. Todd learned about dental technology from a high school friend and was soon on a path that led to owning Access Dental Laboratories in Syracuse, NY. It definitely wasn’t an easy journey, but luckily he had the opportunity to work for and with a lot of great people that helped him along the way. Todd talks about learning every “seat” in a lab, some unique opportunities that most technicians don’t get, deciding to open a lab and how he went about it, and creating a working environment that centers around treating his employees with respect.

If you are looking for a ceramic or sintering furnace and want an incredible deal, look no further!

Ivoclar has their 3 Ways to Save promotion on NOW. Connect with an Ivoclar Sales representative today to learn about how you can save on a new furnace OR, email customer service at cs.us@ivoclar.com. Tell them you heard it on the podcast and get FREE Ground Shipping by using promo code 724.

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Special Guest: Todd Reid.

ORDER TODAY!!

We love learning about the people behind the Instagram accounts. We have been following the adventures of @RVAtoothfairy for a while. There we can see the beautiful full arch zirconia that she obviously puts a lot of work into. But it wasn’t until we talked to her that we learned so much more she has done in our industry. Marithe Baclagon wanted to be a dentist and remembers the exact moment when the laboratory side of it became her passion. After attending a dental technology school and working at a lab, she went back to the school to help develop and create the digital dentistry program. Now she’s at a private practice using all the latest technology and teaching other technicians, dentists, and staff how to produce the best full arch restoration using the best materials.

Are you attending the LMT Lab Day show in Chicago from Feb 23rd-25th? Join Ivoclar as they celebrate their 100 Year Anniversary in the dental industry. A feat few have accomplished and it’s all thanks to you! In the Ivoclar Grand Ballroom A&B, get up close and personal with Ivoclar digital technology, materials, and an EPIC speaker lineup. Learn firsthand from many of the industry’s leading dental professionals as they share their tips and tricks for success. Come and hear from Lee Culp, Esther Schwenning, Yuki Momma, Dr Ed McLaren, Eric Kukucka and MORE... For a full listing of speakers CLICK HERE!

Also, come and see us, Voices from the bench, as this will be our home on Feb 24th and 25th. Come by to say Hi, record with us and tell us what inspires you or just give Ivoclar a “Happy 100 years“ shout out on the podcast.

Does your lab use Magic Touch? If not, you should think about switching just so you can use icortica. Icortica is a program that uses all the data you already collect in Magic Touch and puts it in one easy to see, use, and understand dashboard. Look at every account and see trends, sales, notes, payments, and even remake percentages. Use the data you already have to take your lab and your customer service to the next level. Elvis uses it daily and swears it is a huge part to his success working at the lab. Head over to icortica.com/voices to learn more or send an email to Rob Nazzal at rob@icortica.com and tell him you heard about it on Voices From the Bench!

Special Guest: Marithe Baclagon CDT, Te, M.Ed..

DLAT Southwest Conference and Expo April 1 & 2: Dallas / Fort Worth Airport Mariott

Let's do the math. 52 weeks a year. 208th episode. Never missed a week. It's the 4th year anniversary of the podcast! Amazing we are still going and still loving every minute of it. And it wouldn't be a celebration unless we bring back our good friend that was on episode 1 and 52 and 156, Renata Budny. Renata leads the Restorative Dentistry program at the New York City College of Technology. Joining her is past student and now Professor Jamie Rubin. Jamie talks about getting into the program, her experiences going through the classes, and what it's like being in front of the students and working full time at an in-office lab. Renata updates us on what's happening with the school, dental technology education in general, and what we can do to help schools provide us the trained technicians that we need. We are never too cool for dental technology school.

Accreditation Standards for Dental Laboratory Technology Education Programs

List of CODA accredited schools

Whip Mix, known today for its digital equipment and materials, has been known for decades as a leader in occlusion products with its Whip Mix, Hanau, and Denar articulators and facebows.

The most popular of these is the Denar Mark 300 Series articulator. These popular semi-adjustable instruments are engineered for superior performance and tested thoroughly based on proven methodology. They bring a new standard of interchangeability with factory set accuracy within 20 microns. With their sleek, ergonomic design and powder-coated finish, these articulators have a contemporary look that’s as durable as it is aesthetically pleasing.

The Denmat Mark 320 articulator features Adjustable condylar inclination with 0 to 60,° and Progressive side shift fixed at 15°. The Denar Mark 300 comes complete with: Dust cover, 10 magnetic mounting plates, instructions and standard black carrying case.

Head over to Whipmix.com to order one today.

Is your lab in a position to take on new customers? Do you have the capacity to service more doctors? AmericaSmiles has helped hundreds of labs across the country to acquire new dental accounts.They're the biggest name in Dental Laboratory marketing. Don't waste time mailing and calling hundreds of doctors just to see poor results and hear overwhelming rejection. Let AmericaSmiles do all the heavy lifting for you. For just $195 a month, the AmericaSmiles One Voice program will help you skip to the front of the line. They'll prospect your local or target area, produce your creative marketing, and do all of the cold calling to leave you with extremely qualified appointments; guaranteed to help you find your ideal clients and grow your business.

Visit AmericaSmiles.net/One-Voice to learn more about how you can increase your lab's bottom line. Use promo code VOICESFROMTHEBENCH during checkout to qualify for a month-to-month agreement enabling you the freedom to cancel the marketing service any time! If you’d like to speak with an agent who can answer your questions about a time-tested, completely done-for-you approach to marketing, please call 708 279 9031. Join AmericaSmiles One Voice today - Getting new dentists to try your lab has never been easier.

Did you know that most inLab MCX5 users that have ordered burs from Gro3X once, keep on ordering Gro3X burs over and over again? Because Gro3X burs are engineered by some of the folks who have been providing burs to some of the largest US production labs for years.

Did you also know, that most Roland and DGShape users have no idea what they are missing out?

To give Roland and DGSHAPE users the opportunity to find out for themselves how good Gro3X burs work also for their machines, Gro3X is now offering a BUY 3, GET 2 BURS FREE special. This is exclusively for Voices From The Bench listeners.

Simply go to the Gro3X website at gro3x.com click on burs, then select Roland & DGSHAPE. Add five burs of your choice to your cart, click on CHECK-OUT, enter discount code B3G2Burs and check out.

Special Guests: Jamie Rubin and Renata Budny, CDT, TE.

DOITRIGHT

Learn more about the eLAB shade system

Few things create more interest today than the Digital Denture. Whip Mix has developed a processing system for printed dentures, which uses Dentca, the first 3D-printed denture and denture teeth resins to receive FDA clearance. Their physical properties and biocompatibility pass FDA requirements and enable the printed denture properties to be very similar to conventional dentures. The material, coupled with fast and easy 3D-printing with Asiga printers and the convenience of curing with a Uvitron UV light, results in fewer dentist visits, predictable fit, re-printable data files, lower costs and excellent intraoral denture performance.

To learn how to create your own Digital Denture, check the Whip Mix website for their Digital Denture courses and for more information about the system.

Special Guests: Dimitri Tsichlis and Lidia Croteau .

This podcast is all about featuring people from and associated with our industry. But it's not very often that we get to talk with someone that 100% of the people in dentistry have heard of. Jim Glidwell from Glidewell Laboratories, comes on the podcast to talk about how he accidently and without a plan grew to be one of the largest and most successful dental laboratories in the world with multiple locations worldwide. Jim is a technician at heart that explains that you have to "constantly mess up" to deal with the "Constant Change". From his kitchen table to 5,000+ employees, there is sure to be something learned from him. Jim talks about the importance of advertising, popularizing monolithic zirconia, how COVID affected him personally and the lab, and his new book coming out December 8th "Constant Change"

Order the book "Constant Change: Adventures in business and life – my journey from start-up to 5,000 employees" today!

The UP 3D P5 milling maching from Aurident is a 5 axis, efficient, dry mill. Great for milling zirconia, PMMA and wax. It boasts software that produces high precision and fast milling. It can mill a crown in 14 minutes and the tool life yields about 60-80 hours of quality restorations. A game changer for labs of all sizes, big and small. For under $20K, a small lab can now do their own milling instead of outsourcing and reducing their profits. Quite impressive! Give Aurident a call at 800-422-7373 or you can visit their website at aurident.com.

Whip Mix has developed VeriSplint OS, a popular 3D printed resin that is rigid, durable and affordable. This popular resin was the first 510K accepted splint material that is transparent, biocompatible and polishes to a high, clear shine.

All of this, and a low cost, averaging between $5.00 - $6.00 per splint.

If you’d like more information about VeriSplint OS, visit Whip Mix’s website at whipmix.com or call the 800-626-5651.

Special Guest: Jim Glidewell CDT.