“Just say no to brushing”- idea and the denture is from Brittany Mitchell:
https://www.bonfire.com/shirt-for-removable-techs/
“Don’t pull out” features art work from Charlie Barbour at CIMBdesign:. https://www.bonfire.com/shirt-for-fixed-techs/

You should be able to both shirts in your cart if you want both…. And this time the podcast logo is on the back!
Just a reminder that 100% of the profits get donated to the Foundation For Dental Laboratory Technology.

With Barb off doing what ever ceramist do, Elvis has a nerdy implant conversation with Alan Banks from GuidedSMILE. Alan talks all about his history with Roe Dental Lab and how there have do THOUSANDS of guides using pretty much all the different planning software. Opening GuidedSMILE across the street allowed them to expand the guide services to other labs. Realizing the power of the RealGuide software, Alan worked closely with them to enable doing full stackable surgical guides and smiles all in one software with less clicks. Come get nerdy with us.

Listen to John Wilson from Sunrise Dental Lab and take your own lab to the next level by getting in on some of Ivoclar's End of the Year deals on equipment. If you are looking for your first or looking to expand your capabilities, Ivoclar has just what you need at a time where it's best to invest. Head over to Ivolcar.com or contact your local rep for all the deals today. Don't let the new year come thinking you should have bettered your lab.

Special Guest: Alan Banks.

Be sure to get a SUPER LIMITED edition ZIPPERED HOODIE (or shirt) before JANURARY 6th.
Get your "Dental Technicians: Making Dentist Look Good Since the 1700s" HERE!

You have heard Elvis talk about the Mastering exocad Course he took from the Institute of Digital Dentistry. Well we had the amazing opportunity to talk to the instructor of the series, Marjorie Andrade. Marjorie has a fascinating and fast-tracked journey into the world of teeth. While still in Brazil, she went to technician school and found herself in a lab learning digital in just a few days. Eventually she was so good and fast, so after work she would freelance for people all over the world. It wasn't long before she connected with Dr. Ahmad and was recording (in two languages) the exocad course and then moving all the way to New Zealand to work at the lab of her dreams. All this in less than 5 years!

Are you in the market for top-notch digital equipment, such as mills, scanners, or furnaces? Well, the time to act is NOW! Ivoclar, has introduced unbeatable rates exclusively for customers in North America.

Ivoclar has made it easier for you to invest in cutting-edge digital equipment with lower-than-prime interest rates. Whether you're looking to upgrade your milling capabilities, enhance your scanning technology, or optimize your furnace performance, Ivoclar Digital has you covered.

To take advantage of this offer, the dedicated Digital Specialists at Ivoclar are ready to assist you. For details on how to get in touch, visit Voicesfromthebench.com and the Ivoclar tab to find all the information you need to get started.

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Candulor a dental supply company from Switzerland has solutions no matter if you are analog or digital

Check out their PhysioSet TCR tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from.

The Swiss School of Prosthetics in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply

Candulor, High End Only

Have you ever wanted to learn exocad? Do you find learning new design software overwhelming or just too costly because you have to go to a weekend course. Even if you have never used design any software before, we have the perfect solution for you to begin your exocad journey. Head over to the Institute of Digital Dentistry and select the “Mastering Exocad Course”.

Broken down to three segments, the amazing Marjorie will take you through Fundamentals, Intermediate, and Advanced courses leaving you with the confidence to tackle most cases coming into your lab. I personally am going through all 70 lessons and find it one of the most thorough courses you can take at your own pace.

And for being a listener of the podcast, if you enter code VOICES when checking out they will take an additional 10% off any course they offer…. And they offer a ton of content for labs and clinics.

Special Guest: Marjorie de Andrade .

This week we welcome John Wilson from Sunrise Dental Laboratory out in California to the podcast. He has been at this lab game for a while. Early on he saw the importance of putting his lab on the front line of implant restorations. John comes on the podcast to talk about his early days as a punk kid, mistakes he’s made, and more importantly the lessons he has learned. It’s just an added bonus that he shares the lessons in hope that he can prevent some others from making the same mistake.

Whip Mix is now providing its milling customers with Prima Milling Tools, the high performance milling tools engineered specifically for Roland mills. This new tool range outperforms the competition. The results show not only that the tools last 29% longer than most others, their precision creates pin-point accuracy, ensuring a perfect fit for the patient.

The uncoated tools save up to 40% per restoration over the market leaders, VISIT WHIPMIX.COM OR CALL (800) 626-5651 to get yours today!

Gro3X is a dental supply, service and marketing company that was founded by Norbert Ulmer and their goal is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth.

Attend their upcoming Gro3X Gem Talks on November 5th in Charlotte, NC. Gro3X Gem Talks is an all day marketing symposium in Ted-Talk style featuring some 10+ lab speakers as they share their most relevant and practical marketing techniques.

We will hear from Sasha der Avanessian from Harvest Dental, Anne Kelzer from AMK Dental Lab, Frankie Acosta from AA Dental Design and Ricki Braswell from Beyond Coaching and former Co-Executive Director of the NADL. All of them will talk about real marketing as it is done in their own labs and businesses every day.

Register now at gro3x.com to take advantage of their early bird special of only $95.

Enter discount code VFTB for Voices from The Bench and receive an extra 10% discount, just because you listen to this Podcast.

Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company.

Look no further! Kulzer refining has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks.

With all the non-precious material that has become present in today’s restorations it is important that we ensure the assay sample is homogenous. At Kulzer, they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result.

Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843.

Special Guest: John Wilson.