Jed also shared insights on materials, praising the underrated Empress Multi for its beauty and reliability, and highlighting Ivoclar’s ZirCAD Prime zirconia for solving problems that plague other multilayer products.

Not content with what the market offered, Jed even created his own line of 3D printing resins—including a stone-like model resin and a lavender-infused cast resin that makes a lab smell like a spa.

Now, as the new Director of Development at Utah Valley Dental Lab, Jed is taking on a role testing new ideas and pushing innovation without disrupting production.

Check out the amazing resins from Jed: https://www.archibalddigital.com/category/all-products
IPS Empress CAD® from Ivoclar: https://www.ivoclar.com/en_us/products/digital-processes/ips-empress-cad

Looking for a way to unlock the full potential of your digital dentistry workflow. Take it from Elise Heathcote, associate manager of digital services with Ivoclar. This is all about the Cam Academy. They have a new in-person training experience designed specifically for dental technicians. This hands-on course explores the full potential of programmable Cam software, helping you take your digital workflow to the next level. Learn directly from Ivoclar experts, refine your skills and bring new precision and efficiency to your lab. Cam Academy is more than a course. It's your next step in digital excellence. To reserve your spot, visit the Ivoclar Academy website or contact your local Ivoclar sales representative today.

Special Guest: Jed Archibald.

TO DONATE: https://fdlt.memberclicks.net/donor-form#/

Select: Race for the Future
Enter the name of the racer you want to support: BARB WARNER or THE CROWN JEWELS
Enter the amount (One Million Dollars)

August 14 & 15: PrograMill CAM Academy: A Hands-On Introduction to Digital Milling for Dental Professionals
Ivoclar Academy – Amherst, NY : https://www.ivoclar.com/en_ca/course/programill-cam-academy-module-i-introduction/251438?utm_source=Email&utm_medium=Pardot&utm_campaign=Academy+Newsletter&utm_term=July

This episode is featuring two conversations that Elvis and Barb got while in Gemany at the exocad booth at IDS 2025. First up is Paul Dowling & Jacqueline Ffrench who come from PD Ceramics in Ireland. Paul grew up in a dental family and played in the shed in the backyard that was the lab. After attending lab school in London, Paul came back to Ireland and opened his own lab. Knowing teeth and not business, Paul recruits Jacqueline from a dental office to help. Jacqueline is good with business and saw the struggles in the lab and set out to make it a better place. Now she and Paul are starting to do it all over Ireland.

Then from many miles away (at IDS it seems that way) we are joined by Thomas Baaske, the Global Technical Product Manager at Ivoclar Vivadent AG. That means he oversees a lot of the digital materials and equipment for Ivoclar and there is a lot. Thomas talks about his lab background, being with Ivoclar for over 14 years, the evolution of the milled denture, their new inventory system, and the new Ivotion Based Printed denture.

Let's be honest. There are a LOT of zirconia on the market these days. How do you know which is which? Is one better than another? Is there one that can handle every situation? Check out a FREE webinar from Ivoclar called Zirconia Unboxed with Jeff Smith, CDT.

"This introductory webinar is the first in a five-part series designed to address the most frequently asked questions by dental labs when selecting zirconia for their restorations. With a focus on practical guidance, this session explores the key considerations in choosing the right zirconia, including material properties, esthetics, and processing techniques. This introductory webinar is the first in a five-part series designed to address the most frequently asked questions by dental labs when selecting zirconia for their restorations. With a focus on practical guidance, this session explores the key considerations in choosing the right zirconia, including material properties, esthetics, and processing techniques."

Check it out at: https://www.ivoclar.com/en_us/course/zirconia-unboxed/246115?utm_source=External+-+Voice+from+the+Bench&utm_medium=QR+code&utm_campaign=Academy&utm_term=August

Special Guests: Jacqueline Ffrench, Paul Dowling , and Thomas Baaske.

TO DONATE: https://fdlt.memberclicks.net/donor-form#/

Select: Race for the Future
Enter the name of the racer you want to support: BARB WARNER or THE CROWN JEWELS
Enter the amount (One Million Dollars)

It's hard to believe that IDS 2025 happened over 4 months ago and we are still bringing out conversations we got while at the exocad booth. This one is jam-packed with three conversations with 4 different people in the dental industry that really are making huge impacts. First up is two dentist that are using their time and talent to teach other clinicians from around the world how to implement the digital workflow in their practice. Dr. Milad Shadrooh (The Singing Dentist!) and Dr. Robbie Hughes are from opposite ends of England but both share the passion of education. They talk about their careers, what kind of courses they offer at Avant Garde Dentistry and how through a mentorship program, dentist can go digital both efficiency and confidently.

Then we meet the CTO of Align Technologies, Zelko Relic. Zelko talks about getting into dental, the history of Align Technologies and when they merged in Invisalign, Itero, and exocad. He also talks about the resources they put towards R&D, scaling a company to make over 1 million parts A DAY, what new technologies are currently being worked on, and how they are making the ultimate in providing the comprehensive solution to all.

We wrap up the episode with Ben Weber from ModuleWorks. What is ModuleWorks, well it's kind of hard to explain. You see, it's in about 90% of the manufacturing in the world. It's not the CAM, it's not the user interface, but it's in the background making it all come together. Ben talks about what ModuleWorks is, how it works, and why we can't live without it.

Take it from Jennifer Ferguson from Ivoclar. If you have a PM7 or are thinking about getting a PM7 (Take it from Barb, you should), Ivoclar had launched the "Ivoclar Block Module" that can speed up milling emax by 45%!! The best part is that you can try it for FREE for 90 days. Al l you have to do is send them a message on Instagram at Ivoclar.na or send a email to jennifer.ferguson@ivoclar.com. Now go mill emax faster!

Special Guests: Ben Weber, Dr. Milad Shadrooh, Dr. Robbie Hughes, and Zelko Relic.

Is the debate still going on for digital dentures? It is here and there is no going back. So as we move forward, how are we going to make sure that they are still done correctly? This is exactly what a dental technician and dentist are setting out to do. Robert Kreyer is an icon in the world of removables. From analog to the very first digitally manufactured denture, Robert has seen it all. Dr. Stephen Wagner has been doing removables for years and has embraced digital early in it's life. Together they talk about how digital dentures have evolved over time, the importance of knowing and using the fundamentals, and how the ultimate goal of digital dentures needs to be better and not faster.

Bigjawbone.com

Don't miss this incredible webinar with Tanya Little, a dentist from beautiful Vancouver, Canada. We would like to invite you to a special webinar that she's hosting with Ivoclar and LMT on Wednesday, May 7th, titled "Reflections from a Denturist: 20 Years of Crafting Dentures!". In this program, she will review the incredible history of removables with Ivoclar and focus on the new and exciting evolution based print resin and of course, the PM7. Her goal is to provide you with several key takeaways that will allow you to work smarter and not harder. You can join on May 7th by registering at https://lmtmag.com/webinars/reflections-from-a-denturist-20-years-of-crafting-dentures

Are you a dental lab in need of more talent to improve your bottom line and keep production on schedule? Are you a dental tech with great skills but feel you're being limited at your current lab? Well, the answer is here and this is precisely why WIN WIN GO was created. The dental lab and dental tech community needed a place where labs and technicians can meet, talk about their needs and connect in ways that foster a win win outcome. As a tech. If you're ready to make a change, thinking about moving in the next year or just curious what's out there, sign up today. It's totally free. As a lab, you might be feeling the frustration of paying the big employment site so much and getting so few tech candidates. We understand they don't much care about our industry. WINWINGO.com is simply the best place for lab techs and lab owners to actively engage in creating their ideal future. WINWINGO.com, how dental techs find paradise.

Special Guests: Dr. Stephen Wagner and Robert Kreyer CDT.

Dr. Nilo Hernandez, a seasoned implantologist with over 35 years of experience, and Johnny O., a dental technician with a wealth of digital expertise, have joined forces to address the challenges faced in full arch dentistry. Their collaboration led to the development of the SiOS system, a digital workflow designed to streamline the process and eliminate common issues encountered during implant procedures.

The SiOS system stands out for its ability to adapt to any implant system and surgical workflow, thanks to its unique use of beacons or matchmakers. These elements allow for precise placement and alignment, ensuring a better than printed full arch in just a few hours. This means that dental professionals can now offer their patients a more predictable and less invasive experience, with reduced chair time and improved outcomes.

Dr. Hernandez and Johnny O. shared their journey from the initial concept to the fully realized SiOS system. They discussed the challenges they faced, such as the need for a digital solution that could work in both guided and non-guided environments. Their perseverance and dedication to problem-solving led to a system that not only meets these needs but also elevates the standard of care in implant dentistry.

Join them for the January 15th webinar: https://us06web.zoom.us/webinar/register/WN_I6hPu7hSRxW3cZBD95qleg#/registration

Make sure you visit Ivoclar at LMT Lab Day Chicago 2025. Ivoclar will be in their usual spot at Grand Ballroom A&B in the East Tower, on the Gold Level. Right across from the registration desk. They have a killer line up of speakers including:

Mariano Maurizi

Lee Culp

Dr. Shashikant Singhal

Don Yancey

Jed Archibald

Benjamin Gebhardt

Tanya Little

Aaron Johnson

Jenelle Tabaković

Patrick Coon

John Wilson

Luke LaRocque-Walker

Paul Imperius

Jonny "exocad" Jakson

Yuki Momma

Dr. Ken Malament

Stephenie Goddard

Jessica Love

Dr. George Tysowsky

Michael Roberts

Barbara Warner!

Register today!

Make sure you come see VOICES FROM THE BENCH recording from the Ballroom all weekend!

Special Guests: Dr. Nilo Hernandez and John Orfanidis CDT.

Listen to John Wilson from Sunrise Dental Lab and take your own lab to the next level by getting in on some of Ivoclar's End of the Year deals on equipment. If you are looking for your first or looking to expand your capabilities, Ivoclar has just what you need at a time where it's best to invest. Head over to Ivolcar.com or contact your local rep for all the deals today. Don't let the new year come thinking you should have bettered your lab.

Special Guests: Jessica Wallen and Randall Berry.

Have you ever looked at crappy impressions or work and said to yourself, I could do better than this. That is exactly what this week's guest did. After working in a lab for an ex-father-in-law, Dr. Timothy Royer started doing all-on-xs in an in-office lab. Seeing all the bad he was getting, he was determined to become a dentist and do it better. After getting his Masters and then doctorate, Dr. Royer now owns Elite Dentures in Nederland, Texas where he is helping patients on their own journey through completely restoring their mouth and providing excellent care along the way.

Listen to John Wilson from Sunrise Dental Lab and take your own lab to the next level by getting in on some of Ivoclar's End of the Year deals on equipment. If you are looking for your first or looking to expand your capabilities, Ivoclar has just what you need at a time where it's best to invest. Head over to Ivolcar.com or contact your local rep for all the deals today. Don't let the new year come thinking you should have bettered your lab.

Special Guest: Dr. Timothy Royer.

When you think of companies that have changed dentistry for the better, Ivoclar is always on that list. From the world’s first pressed ceramic to emax, from heat injected acrylics to milled dentures, Ivoclar has been innovating and making teeth better. This week Elvis and Barb talk to their VP of Product Marketing for North America Don Bell. Don was on the podcast almost 4 years ago and comes on to update us on what's been happing with the company. He talks about coming out of covid, learning from customer feedback, the evolution of dentures and the upcoming Ivotion print, living in the age of digital treatment planning through communication and collaboration, Ivoclar Academy, and end of the year promotions.

If you are in the market for purchasing a new milling machine or a furnace, Voices From the Bench invites you to connect with an Ivoclar sales associates. They have several great deals and financing options now available for you to take advantage of. These robust and dependable machines were designed to make your laboratory more efficient and profitable. They are work horses when it comes to processing IPS e.max lithium disilicate and the amazing Prime Zirconia. The PM7 mill also allows you to do digital dentures with their game changing Ivotion puck. Head over to ivoclar.com, voicesfromthebench.com/ivoclar, or call them at 1-800-533-6825.

Special Guest: Don Bell.

As we continue the amazing conversations we got while at exocad Insights 2024 in Mallorca, Spain, we want to thank again the good people at exocad that made all this possible. This episode brings us three fantastic conversations with 3 fantastic people.

First up is Dr. Marcus White from England who is one of the UK's foremost opinion leaders in digital dentistry and intra oral scanning. Dr. White talks about his on-site lab, utilizing remote designers and milling centers, and his view of the full arch workflow.

Next is UK lab owner, Ashley Bryne. Ashley is the son of a lab owner that told him not to get into the business. It's a great thing he didn't listen to him, because now Ashley owns Brynes Dental Lab, one of the biggest labs into digital and implants in England. Ashley talks about his journey, why his labs uses both exocad and 3shape, bringing technicians to Insights, and being a part of the Conus Group of laboratories.

Then we wrap up the episode with Seth Potter. Since the age of 12, Seth knew he wanted to be a dental technician. After school and working in a lab, Seth soon found himself needing a new direction. So, he got a laptop and exocad and started looking for work. Now he's not only a freelance designer but also a Independent Certified exocad Trainer.

Introducing Ivotion Digital Dentures from Ivoclar – Experience unparalleled precision and efficiency with Ivoclar‘s state-of-the-art digital denture workflow.

Ivotion is available in their patent pending monolithic disc that combines denture base and tooth materials in one seamless puck. Or if you lab needs more flexibility, Ivotion is also available as stand-alone discs - Ivotion Base, Dent and Dent Multi all in 98mm width to fit your favorite milling machine.

With Ivotion you can streamline your lab’s processes, reduce production time, and enhance patient satisfaction. Elevate your lab's capabilities with Ivotion Digital Dentures – where innovation meets perfection. Discover the future of dentures today with Ivoclar." Thanks for your continued support of the podcast Ivoclar.

Special Guests: Ashley Byrne, Dr. Marcos White, and Seth Potter.

This week we start with the conversations we got while in Mallorca, Spain recording at the exocad Insights 2024 meeting. THANK YOU exocad for inviting us to this amazing meeting. It's held every two years, so go ahead and plan on attending in 2026!

First up with talk with a certified exocad trainer, Jaime Moreno. Jaime talks about his boutique lab, the technology he uses, and common questions a trainer gets. Jaime is also the gentleman that took time out of his busy schedule to go to the Barcelona airport lost and found, pick up my laptops, box them, and ship them. He is the hero that has made every conversation from exocad Insights possible to be released.

Then we chat with Saulius Janusevicius & Alex Chabachevitch. These two technicians meet at exocad Insights two years ago and have remained friends since. Saulius is from Lithuania and Alex is from Canada but found a common likeness for teeth and exocad. They talk about their journey into dental technology, what they specialize in now, and what they get out of going to exocad Insights.

Then we wrap up the episode with Pinhas Adar. Pinhas owns a lab in Atlanta, Georgia. But his story starts at the age of 14 in Israel. Pinhas talks about his amazing journey, people that have influenced him along the way, and how he can charge the same for a full arch and a single unit.

On September 11th in Fort Worth, Texas, the 10th annual Race For the Future will take place to raise money for the Foundation For Dental Laboratory Technology. Barb is doing her 9th solo race and Elvis is teaming up with Mark Williamson and Bobby Kenney to form The Abutments. Go to dentallabfoundation.org and click on the DONATE TODAY button. There you need to log in or create an account. Then select “Race for the Future” and enter the name of either Barb Warner or the Abutments, then the amount you want to donate.

Wanting to take your knowledge and skills to the next level? If you are looking for the best education dedicated to dentistry in both the labs and clinics, check out Ivoclar Academy.

From on-demand webinars to in-person training, Ivoclar Academy has a program to meet your busy schedule. Check out all they have to offer HERE!

Special Guests: Alex Chabachevitch, Jaime Aisa Moreno, Pinhas Adar MDT, CDT, and Saulius Janusevicius.

Go show some love to Jaume Aisa Moreno who is reuniting Elvis with his podcast laptop!

Shaana Gripp started off as a dental assistant because of her grandmother. After getting into doing some lab work, found out that she really enjoyed it. In the early 2000s she was exposed to CEREC and a passion for designing started. Moving to a full-time position in a lab was where she picked up all the skills as they moved her from models, waxing, and eventually ceramics. Now Shaana is running an in-office lab that does the work of 8 dentists in 4 locations. Shaana talks about her journey, learning how to self-teach, daily life in her lab, and how photography plays a big part in her full arch work.

Wanting to take your knowledge and skills to the next level? If you are looking for the best education dedicated to dentistry in both the labs and clinics, check out Ivoclar Academy.

From on-demand webinars to in-person training, Ivoclar Academy has a program to meet your busy schedule. Check out all they have to offer HERE!

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Special Guest: Shaana Gripp.

Did you know that not all Zirconia is the same?

ZirCAD Prime Zirconia from Ivoclar is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength.

ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723!

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Join Elvis & Barb as Voices From the Bench goes international! On May 9th and 10th, the podcast will be recording at https://exocad.com/insights2024 on the beautiful Spanish island of Mallorca.

This is a fantastic educational event for all of you in the lab industry – and your clinical colleagues!

The international speaker line-up is top-notch.

There will be: keynote presentations from master dental technicians, digital experts, implant surgeons, lab owners, and more!

Exocad’s software experts will run hands-on sessions so you can get to know the latest releases…including DentalCAD 3.2 Elefsina…which was released recently.

Techs…. Do you have a problem with a design? Just bring your stl file and let the Application Specialists take a look at it.

Check out exocad.com/insights2024 to see the AMAZING line up of speakers and to register. Use promo code VFTB15 to save 15% off registration to what will be one of the greatest events of the year.

See you there!

Special Guest: Aleksandra Polczynski.

Are you in the market for top-notch digital equipment, such as mills, scanners, or furnaces? Well, the time to act is NOW! Ivoclar, has introduced unbeatable rates exclusively for customers in North America.

Ivoclar has made it easier for you to invest in cutting-edge digital equipment with lower-than-prime interest rates. Whether you're looking to upgrade your milling capabilities, enhance your scanning technology, or optimize your furnace performance, Ivoclar Digital has you covered.

To take advantage of this offer, the dedicated Digital Specialists at Ivoclar are ready to assist you. For details on how to get in touch, visit Voicesfromthebench.com and the Ivoclar tab to find all the information you need to get started.

Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth are the ultimate solution for creating lifelike and stunning smiles.

Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA believes in the power of experiencing excellence firsthand, for a limited time only, they’re offering you the chance to get a complimentary case sample. That’s right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft

Don’t wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you’re ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store.

Join the VITA family today.

Candulor a dental supply company from Switzerland has solutions no matter if you are analog or digital

Check out their PhysioSet TCR tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from.

The Swiss School of Prosthetics in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply

Candulor, High End Only

Have you ever wanted to learn exocad? Do you find learning new design software overwhelming or just too costly because you have to go to a weekend course. Even if you have never used design any software before, we have the perfect solution for you to begin your exocad journey. Head over to the Institute of Digital Dentistry and select the “Mastering Exocad Course”.

Broken down to three segments, the amazing Marjorie will take you through Fundamentals, Intermediate, and Advanced courses leaving you with the confidence to tackle most cases coming into your lab. I personally am going through all 70 lessons and find it one of the most thorough courses you can take at your own pace.

And for being a listener of the podcast, if you enter code VOICES when checking out they will take an additional 10% off any course they offer…. And they offer a ton of content for labs and clinics.

Special Guest: Dr. Ahmad Al-Hassiny.

Ivoclar is having two amazing in-house training sessions in September featuring Jurgen Seger.
September 7 & 9 in Mississauga, Ontario, Canada
September 11& 12 in Amherst, NY, USA

SAVE 30% by using the code: VFTB30

You and a friend can each save 50% by emailing Nicola.Kowal@ivoclar.com and telling them you heard it on Voices From the Bench!

TOPICS INCLUDE:

• Choice of zirconia material related to strengths, esthetics and efficiency
• Design nesting and milling strategies for Multi Zirconia
• Infiltration options
• Processing monolithic restorations surface finish, staining
• Gingiva microlayering different pink ceramic colors
• Tooth microlayering management of color and 3D effects.
• Key tips related to firing aspects for zirconia bridge structures
• Micro and macrotexture of the tooth surface

On August 27th many brave and fearless dental technicians will take to the water and road to participate in the 2023 Chicago Triathlon. They don't do it for fame or personal gain, but to raise money for the Foundation For Dental Laboratory Technology.
PLEASE head over to dentallabfoundation.org and click the DONATE TODAY button. Log in and choose the “Race for the Future” option. There you can put the name of a racer you want to sponsor. You can put:

Barb Warner
Team Abutments (Elvis Dahl, Mark Williamson, Bobby Kennedy)
Voices From the Bench (50/50 split between Barb and Elvis' team)

It’s always sad when good things come to an end and this week we bring you the last of all the amazing conversations Elvis and Barb got when Ivoclar partnered up with us to record at LMT Lab Day West 2023. First up is a 45-year veteran of removable dentures, Glen Smith. Glen comes on to talk about how his lab, Robertson Lab (part of the Apex Dental Laboratory Group) can do so much of their removables digitally. Even after all this time, Glen is full of excitement and passion for this workflow. He talks about the workflow, automating certain steps, and training the next generation of lab technician. Then a “movie star” in our industry stops by, Gary Archer. Gary makes custom dental prosthetics for movies and television shows. He talks about what shows he is working on, some recent movies where his teeth have been featured, the stories behind them, and how he makes some with removable teeth for gory scenes.

Did you know that not all Zirconia is the same?

ZirCAD Prime Zirconia from Ivoclar is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength.

ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723!

Special Guests: Gary Archer and Glen Smith CDT TE.

First up is Susan van Kensbergen who is the Vice President of Myerson. Susan talks about her journey from being a ceramist, moving up in lab responsibility, managing the world's largest LAVA milling center, and finding her new home at Myerson, the home of Durflex and an upcoming "game changing" printer.

Then we chat with Neal Allen from Mustard Seed Dental Studio. Neal spent 20 years in a large lab before moving into a growing lab owned by a Prosthodontist. Neal talks about the importance of creating a happy lab culture and treating the employees like family.

Next is the "better" half of Artifex Dental Lab, Julio Munoz. Julio grew up in Bolivia where he is a board-certified Oral Surgeon. A lady brought him to the US where he connected with Artifex and helped create the "Triple Jig" technique for full arch implant restorations.

We wrap us the whole weekend with a special treat, Barb's technician son, Zack Wojdan. Zack talks about growing up in the lab, starting at the beginning, working his way up, working with his mom, and goals for the future.

A BIG thanks to LMT for putting on an amazing weekend and a BIGGER THANKS to Ivoclar for hosting us.

The new PrograScan PS3 and PS5 provide true-to-detail, high-resolution and accurate scans for coordinated digital workflows that are precise, fast, and always accurate.

The PS3 and PS5 are powered by the popular and intuitive DentalCAD software from Exocad. Whether you are looking for your first scanner, to upgrade or add to your existing scanners, the PrograScan may be the one for you.

Reach out to your friendly Ivoclar sales representative to select a scanner that matches the needs of your lab Today and tell them you heard about it on the podcast!

Candulor a dental supply company from Switzerland has solutions no matter if you are analog or digital

Check out their PhysioSet TCR tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from.

The Swiss School of Prosthetics in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply

Candulor, High End Only

Special Guests: Julio Munoz CDT, Neal Allen, Susan van Kinsbergen, and Zack Wojdan.

June is CDT and Dental Technician Appreciation Month. Every year we highlight those that mean a lot to all of us. For every episode in June we will play YOUR audio clips thanking that special someone in or around our industry. Just record yourself on your phone or computer and email it to info@voicesfromthebench.com and we will play it on the show.

Back in February, there is the biggest dental lab meeting in the US called Lab Day Chicago. We were set up in the Ivoclar Ballroom all weekend and recorded a ton of great people. This week brings two fantastic conversations. First up is Chet Spivey. Chet has been with Ivoclar for over 25 years and tells us about the journey of the innovative company. With so many products under their belt, Ivoclar can celebrate their 100th year by honoring the customers. Then we finally get to chat with Canadian Denturist superstar Esther Schwenning. Esther talks about following in a family tradition of becoming a denturist, learning and teaching the suction denture technique, setting up her practice to go all in with digital, and of course….. beer.

Are you attending the LMT Lab Day West show in Garden Grove California?

Join Ivoclar as they continue to celebrate their 100 Year Anniversary in the dental industry.

At Lab Day West you can get up close and personal with Ivoclar digital technology, materials, and an EPIC speaker lineup. Learn first hand from many of the industry’s leading dental professionals as they share their tips and tricks for success. Come and hear from Rafael Santrich, Jed Archibald, Steve Hatch and experience hands-on courses from Jenelle Tabakovic, and Pat Coon. For a full listing of speakers simply visit LMTmag.com and register today!

Also, come and see us, Voices from the bench, as this will be our home from May 12-13th. Come by to say Hi and tell us what inspires you or give Ivoclar a ”Happy 100 year“ message.

Candulor a dental supply company from Switzerland has solutions no matter if you are analog or digital

Check out their PhysioSet TCR tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from.

The Swiss School of Prosthetics in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply

Candulor, High End Only

Bringing Dentures to Life, Featuring Sr Nexco® with Jenelle Tabaković at LMT Lab Day West show in Garden Grove California.In this hands-on course, Jenelle Tabaković teaches you how to take your dentures to the next level using SR Nexco Gingival Composite. Suitable for both analog and digital dentures, she leads you through a deep dive into the proper cutback, prep and glaze protocols. Space is limited. Light lunch is included. Register HERE!

Special Guests: Chet Spivey and Esther Schwenning.

If efficiency and performance are what you are looking for in a compact milling system, then the PrograMill DRY from Ivoclar is the right choice for you.

Produce precise zirconium oxide crowns and bridges plus a range of PMMA materials including the innovative IVOTION material for the digital production of complete dentures.

Ivoclar provides white glove delivery service, training, choice of service contracts and their outstanding after sales service and support.

Contact your friendly Ivoclar sales representative today for lucrative promotions and to create a digital solution that’s right for you! _

Candulor a dental supply company from Switzerland has been making teeth from 1936.

Check out their Physioselect TCR tooth line now with new 18 anterior molds specifically made for the US market.

Discover all the solutions for Removables at Candulor.com. America with get supported and supplied by the only authorized partner Edmonds Dental Supply

Candulor, High End Only

Special Guest: Brian Binnie.

Does your lab use Magic Touch? If not, you should think about switching just so you can use icortica. Icortica is a program that uses all the data you already collect in Magic Touch and puts it in one easy to see, use, and understand dashboard. Look at every account and see trends, sales, notes, payments, and even remake percentages. Use the data you already have to take your lab and your customer service to the next level. Elvis uses it daily and swears it is a huge part to his success working at the lab. Head over to icortica.com/voices to learn more or send a email to Rob Nazzal at rob@icortica.com and tell him you heard about it on Voices From the Bench!

Special Guest: Ira Rosenau.

Information and how to register for the Race For the Future 8.0 August 28th

Information and registration for the Chicago Triathlon

Register for the FREE Education Day on August 27th
(COME TO THE DINNER!)

Donate to Barb or Team Voices From the Bench!!!!

Did you know Asiga has over 500 validated materials on their open material system. And it's growing every day?

By harnessing Asiga's proprietary layer monitoring technology with its smart positioning system and integrated internal radiometer, as a laboratory, you will be able to produce any indication you desire. Whether models, splints, temporaries, or even permanent crowns.

Your investment will be future proofed by Asiga's rugged engineering. Providing you with a fast, accurate, and repeatable machine, with a reputation that is time tested in the laboratory industry.

If you would like to learn about Asiga's machine or material offerings, please visit the website at asiga.com or contact your favorite dental reseller.

Whip Mix offers you the ultimate in ease, material flexibility and unattended production with the Roland DGA DWX-52DCi milling machine. The popular mill’s automatic disc changer expands your lab production and profit, using a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and several other automated features.

The DWX-52DCi dental milling machine now comes with performance visualization software and other intelligent updates. The 5-axis mill even knows which tool to automatically swap out when tools have reached their designated lifespan. Just power it on, let it go, and automatically and accurately mill numerous dental restoration jobs with complete unattended confidence.

If you’re interested in learning more about the Roland DGA DWX-52DCi, visit whipmix.com or call 800-626-5651.

Special Guests: Michael Teiniker and Wolfgang Teiniker.

Imagine having to teach over 80 students partial design during covid. That is exactly what Dr. Wendy Clark had to do. Heading up the Pre-doctoral Removable Prosthodontics at the University of North Carolina in Chapel Hill, Dr. Clark knew she needed something that the school could afford and would allow for remote lessons. She leaned on her longtime friend and lab technician, Craig Holland. Craig is no stranger to odd and unusual cases, but during the shutdown, Craig found the time from his usual work at 3 Point Dental Studio to self-teach himself coding. Along with his son, CJ Holland, the two used the Blender software and modified it to give Dr. Clark what she needed. This free and open software called Excalibur can do models, custom trays, dies, flippers, nightguards, crown and bridges, and much more.

Check out the Excalibur Software!

The fastest growing product at Gro3X are the Gro3X Aligners. Gro3X Aligners are only available from Gro3X Aligner certified labs: Why? Because they believe in the synergies that are being created between you, the dental office, and your lab. And they want to further leverage these synergies. Their aligners are used as a pre-treatment to a larger restorative esthetic case, to widen gaps prior to placing implants, to close a diastema, ease crowding, and simply enhance your patient’s smiles. Even for your Essix retainer needs your Gro3X aligner certified lab can help. Look for a Gro3X Aligner certified lab near you, such as Castle Dental Lab in San Antonio, TX (ask for Blaine), AMK Dental Lab in O’Neill, NE (ask for Anne), Staggs Dental Lab in McCoole Maryland (ask for Derrick), AA Dental Design in Murrieta, CA (ask for Frankie), and many, many more… For a complete listing of Gro3X Aligner Certified Labs go to www.gro3x.com

Whip Mix offers you the ultimate in ease, material flexibility and unattended production with the Roland DGA DWX-52DCi milling machine. The popular mill’s automatic disc changer expands your lab production and profit, using a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and several other automated features.

The DWX-52DCi dental milling machine now comes with performance visualization software and other intelligent updates. The 5-axis mill even knows which tool to automatically swap out when tools have reached their designated lifespan. Just power it on, let it go, and automatically and accurately mill numerous dental restoration jobs with complete unattended confidence.

If you’re interested in learning more about the Roland DGA DWX-52DCi, visit whipmix.com or call 800-626-5651.

Special Guests: CJ Holland, Craig Holland, and Dr. Wendy AuClair Clark.

Denture Babes website

The first 500 orders placed between November 1st and November 14th will all get a FREE LIMITED EDITION Metallic Voices From the Bench sticker!

Swiss School of Prosthetics 2022 course dates!

Gro3X is a dental supply, service, and marketing company. It is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. They carry amazing zirconia burs and their “rainbow burs” for PMMA and TriLor are top-notch. They also carry zirconia from Aidite, a wide range of Harvest Dental products, and different 3D print resins.

What’s really cool about Gro3X is, that you can join their Gro3X Family program for only 99 cents. This will then give you an additional 10% discount on all of their supplies and even their CAD/CAM design and fabrication services.

Get a 3-months trial membership with Gro3X Family now for only $0.99 and receive 3 Shade Peg Shots - free of charge.

Just go to www.gro3x.com and add Gro3X Family to your cart, then add 3- Shade Peg Shots of 3cc each to your cart and go to check out, enter discount code VFTB for Voices From The Bench and check out.

There are 3D Print resins for models that do a decent job, then there is Whip Mix VeriModel OS.

Dr. Michael Scherer, a prosthodontist from Sonora, CA says “Whip Mix VeriModel OS is one of the finest model resins I have ever worked with. It’s amazing”.

The popular resins offer the dental laboratory a high quality, smooth surface finish, extreme precision, reliable accuracy, and fine detail. They can be used in 385 and 405 nanometer printers, and are compatible with silicone-base separators. VeriModel OS print resins are available in Ivory, Golden Brown, Grey, and White colors for any model application.

For more information, call (800) 626-5651, or visit www.whipmix.com.

Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company.

Look no further! Kulzer refining has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks.

With all the non-precious material that has become present in today’s restorations it is important that we ensure the assay sample is homogenous. At Kulzer, they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result.

Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843.

Special Guests: Andy Stark and Todd Blankenbecler.

• Cade Tippet
• Marlin Gohn
• Fernando Sanchez Jr and Gary Osborn
• Spencer Watkins

Sit back and enjoy the sounds of live "in-person" conversations.

Few things create more interest today than the Digital Denture. Whip Mix has developed a processing system for printed dentures, which uses Dentca, the first 3D-printed denture and denture teeth resins to receive FDA clearance. Their physical properties and biocompatibility pass FDA requirements and enable the printed denture properties to be very similar to conventional dentures. The material, coupled with fast and easy 3D-printing with Asiga printers and the convenience of curing with a Uvitron UV light, results in fewer dentist visits, predictable fit, re-printable data files, lower costs and excellent intraoral denture performance.

To learn how to create your own Digital Denture, check the Whip Mix website for their Digital Denture courses and for more information about the system.

Special Guests: Cade Tippett, CDT, Fernando Sanchez, Jr. CDT, Gary Osborn CDT, Marlin Gohn CDT, and Spencer Watkins.

Vision 21 this Weekend! Register here and head to Nashville!

Dental Laboratory Association of Alabama meeting! April 24 in Huntsville. Take a look and register here.

Aurident offers so much more than just the P5 michine. They offer all the needed accessories like Nabertherm furnaces and vacuums by Renfert. And all the consumables can be got in one place! Aurident has Delta Zirconia, Aurident Zr, Aurident cutting tools, and Quest pmma ! Aurident definitely is a One Stop Shop for any dental laboratory's needs! Call our friends, Aurident, at 800-422-7373 or visit their website at aurident.com!

Whip Mix is very excited to announce the new PRO 4K large format 3D printer from Asiga. It’s ideal for printing any kind of model, dentures, splints, surgical guides, impression trays and more.

The Asiga Pro 4K DLP printer is priced at under $25,000, has a large build plate and is available in both 65µm and resolution versions. For information about the Asiga Pro 4K, visit www.whipmix.com.

Special Guest: Justin Marks CDT.

Growing up in a lab that almost 100% made metal frames for other labs, Tim Bertram started at an early age. Now he owns Bertram Dental Lab that still makes metal frames for other labs, but now does it with an impressive digital workflow. He talks about printing SLM frames, milling flexibles, and printing surgical guides. With a move to a new facility, Bertram is setting up to be partner for you lab for a long time.

The UP 3D P5 milling maching from Aurident is a 5 axis, efficient, dry mill. Great for milling zirconia, PMMA and wax. It boasts software that produces high precision and fast milling. It can mill a crown in 14 minutes and the tool life yields about 60-80 hours of quality restorations. A game changer for labs of all sizes, big and small. For under $20K, a small lab can now do their own milling instead of outsourcing and reducing their profits. Quite impressive! Give Aurident a call at 800-422-7373 or you can visit their website at aurident.com.

Whip Mix is pleased to add VeriCast OS, a burnout pattern print resin, to Whip Mix’s growing Veri Brand Resin offering. VeriCast OS works with LCD and DLP printers in both 385 and 405 nanometer wavelengths.

It prints accurate and detailed crowns, bridges, substructures, and RPD frameworks, is durable, and leaves no ash or residue.

Since it burns out cleanly, VeriCast OS is ideal for investment casting and ceramic pressing. For optimal results, we recommend Whip Mix ResinVest, which is a phosphate investment made specifically for burning out printed or milled resin patterns.

Visit whipmix.com to learn more about VeriCast OS or any of Whip Mix’s other 3D Print Resins.

Special Guest: Tim Bertram.

The UP 3D P5 milling maching from Aurident is a 5 axis, efficient, dry mill. Great for milling zirconia, PMMA and wax. It boasts software that produces high precision and fast milling. It can mill a crown in 14 minutes and the tool life yields about 60-80 hours of quality restorations. A game changer for labs of all sizes, big and small. For under $20K, a small lab can now do their own milling instead of outsourcing and reducing their profits. Quite impressive! Give Aurident a call at 800-422-7373 or you can visit their website at aurident.com.

The Asiga MAX, the world’s most advanced lab 3D printer, offers exceptional productivity in a small footprint and Whip Mix has plenty in stock. So anyone interested in owning this proven 3D printer and savings lots of money with a Section 179 deduction, order now so it can be up and running in your lab or dental office before the end of the year!

As an Open Material System, you can print any suitable resin from any material manufacturer. Your choice, no strings. The Max also features the Fastest Material Changeover of any 3D printer. Labs LOVE this! Change completely from one print resin to another in under 30 seconds.

Call Whip Mix today (800-626-5651) to enjoy lots of holiday savings and tax credits with the finest printer available!

Special Guest: Jimmy Stegall .

BEGO™ Varseo XS 3D Printer and the printed temporary crown

Whip Mix is very excited to announce the new PRO 4K large format 3D printer from Asiga. It’s ideal for printing any kind of model, dentures, splints, surgical guides, impression trays and more.

The Asiga Pro 4K DLP printer is priced at under $25,000, has a large build plate and is available in both 65µm and resolution versions. For information about the Asiga Pro 4K, visit www.whipmix.com.

Special Guest: Saro & Raffi Hatzakortzian.